Date: Sat, 14 May 1994 19:27:18 -1000 From: brian@nds.com (Brian Dockter) Message-Id: <94May14.222731pdt.8050@rainier.nds.com> Organization: Division of Applied Sciences, Harvard University Subject: Broken North Shore Radical I currently have a North Shore Radical which has a broken brass (?) ferrule (the one used to connect the lower spreaders to the T connector). Does any one know what size ferrule I need, and where I might be able to find one? Thanks, Brian -- Brian Dockter | Northwest Digital Systems UUCP: uunet!nds!brian | Voice: 206-524-0014 Internet: brian@nds.com | FAX: 206-524-3440 = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = Date: Tue, 17 May 1994 11:04:07 -1000 From: uspehmev@ibmmail.COM Message-Id: Organization: Division of Applied Sciences, Harvard University Subject: RE:BROKEN NORTH SHORE RADICAL ----------------------- Mail item text follows --------------- >To: kites@das.harvard.edu Date: Sun, 15 May 1994 05:27:18 GMT From: >brian@nds.com (Brian Dockter) Subject: Broken North Shore Radical >I currently have a North Shore Radical which has a broken brass (?) >ferrule (the one used to connect the lower spreaders to the T >connector). Does any one know what size ferrule I need, and where I >might be able to find one? I don't know the size but if you contact Top of the Line or BFK they should be able to provide you with the ferrule you need. Into The Wind also, just tell them what kite you need it for and they should be able to help you. I know I bought that same ferrule from one of the three for my North Shore VIP. Phone Numbers for all three have been posted and should be in the archives. Mark Virgilio (uspehmev@ibmmail.com) PS: If you think sand is hard, try flying on frozen ground sometime. Sand is probably the most forgiving. (Which is why we usually fly at the beach) = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =